Chrisswim Stuff.

[chrisswim]

Austrian mechanized vehicles.

Leopard 2A7+



AJAX model that I use os the ASCOD.

[chrisswim]

Logistics for Germany. Finished the Unimog trucks, the trailers have been finished for several months. Most of the trailers were 3-D printed. One kitbashed.

[chrisswim]

On the M2A3 hull with M-6 Linebacker turret.

[chrisswim]

My rendering of the Bradley M2A4, without ERA, hypothetical.



M2A4 w/ERA

[chrisswim]

A Company of M2A3 without ERA.



M2A3 w/ERA

[chrisswim]

Put three of these antennas on the hull.

Dang traffic ….. but a few of us can watch T.V. since we have our rabbit ears.

[chrisswim]

Estoniadom has refurbished some Abrams, then painted in MERDC.

[chrisswim]

Abrams in MERD, with blade.

[chrisswim]

Finished with this group…. Two turrets needed barrel repairs and another doesn’t have a stem for the hull. Might look for a magnet to glue on the serve as the stem, or glue it to a hull with mine rollers. If you have an idea, please share it. Thank you.

[chrisswim]

HESCO barrier

[panzergator]

Short piece of thin metal rod, drill hole in bottom of turret, drop of cya no a cry late in the hole, insert rod. There's your stem.

[chrisswim]

PG, your comment got me thinking….. danger, … danger.

My stem is off center by 0.53 of a millimeter.
This item to the right is where I cut my stem from.



Rectangular stem, cut corner down some.





In this picture as you can see, the turret is seated to the port side by just over 1/2 mm.


Turkish armor.

[chrisswim]

Namer A3 for the Commonwealth.
Long live the Monarchy!!



From the left …M2A4 Bradley with 30mm with two M-6 Linebackers with ERA.

[foxbat]

As always, quantity & quality. And instructive as well. I thought the Turks had Leo 2 A4s, but are the ones in the background 2A6?

[chrisswim]

The kit-bash Bradley., from a picture online.





With ERA


On the left, the M2A4 Bradley, armed with 30mm, the two others are Linebackers with ERA.