GHQ Models Forums

Like the trucks. Canvas should be original color OD and not painted. Deteriorates the material.

Ok, I did not paint canvas on these… LOL, lol,

Drones on MAN trucks, need to paint the drones gray.


Homemade bridge pieces, by Jason.


Hummv, I did this perhaps 2 decades ago.



See, there isn’t any painted canvas.

Painted, underside is a light grey.

Lookin good Chris!

Thank you, Mike.

Here is a post from 4 years ago on FB.

Nice work on the drone trucks, Chris. I assume the drones are 3D models that are printed. Am I correct?

No, the drone are from modern Harpoon naval aircraft pack, 1/2400, as I recall.
The two with props are Greyhounds, C-2 or C-3. The airplane on the trailer is an F-4, or A-4 with nose cut off.
The 3 I’m working on are AV-6 with nose cut back, and vertical stabilizer cut down. These are going on MAN 5-ton truck. Will need to repaint some with these.
I have used helicopters from the game Fortress America. Also used a few of the jet/bombers as well from the game.

I may swap out a couple of Ww2 fighters for these two.

V-22 Ospreys and Tigre’s



Balzac Republic UH-1 Hueys, fire trucks in the back.
I should work on the UPS Vans in front.



Can you determine the types of prop planes these are? For special assault teams.



Going back to 2016. Made a trailer from truck frame. Have a TLAM trailer and some Italian Centauro that are to be painted.

SWAT, command van. The CROWS on top has been trimmed down to represent a .308 semi-automatic vs. M-2 .50 cal.

Just put in the crewmen for these LAV Mortars. (One is missing its mortar).

Nice work Chris!

Thank you Mike.

Trailers for the MLRS containers, hand made. Also in the Hemtts.

That's a lot of rockets, Chris! I hope you have MLRS and HIMARS standing by waiting to fire them!

Redleg, to address your concern having enough MLRS launchers, here is a few.