Page 42 of 63
Re: Chrisswim Stuff.
Posted: Sat Jul 23, 2022 9:31 pm
by chrisswim
B.C.,
Yes, I did use dryer sheets. The dryer sheets are fuller, i.e., a fuller material. The cheese cloth has the texture and more of the look of netting to me.
The first picture is taken without zooming in, distance 8-9 inches.
This second picture is at a distance of 10 inches
I may pull some other items out to compare & contrast. I am not trying to debate.
I will point out that I will not cover an entire company (14 vehicles) in netting if GHQ. If some lost crappy model, cover them.
Re: Chrisswim Stuff.
Posted: Mon Jul 25, 2022 8:03 am
by chrisswim
Post M1A2 TUSK cheese cloth and M60 A1 dryer sheet, used as camouflage netting.
Took a few pictures of Ratels, so here is a bonus for you.
Re: Chrisswim Stuff.
Posted: Fri Aug 12, 2022 8:30 am
by chrisswim
Recent pick up, hundreds of vehicles. Stripped paint on vehicles, repainted. Includes Leopard 1&2, Marders, M113, M1 and M1A1, M2, MLRS, M60A1, Hummvs, M1083, Scorpions, etc. Still working on them.
Abrams being used as bridge layers.
Re: Chrisswim Stuff.
Posted: Sat Aug 13, 2022 9:33 pm
by chrisswim
Abrams bridge layers utilizing the bridge from the M60 bridge layer.
Just about refinishing these, add some more camo paint.
Re: Chrisswim Stuff.
Posted: Tue Aug 30, 2022 6:25 am
by chrisswim
Re: Chrisswim Stuff.
Posted: Wed Aug 31, 2022 4:54 pm
by SMS KONIG
Like the bridge on the M!, you made the new Joint Asault Bridge (JAB). The launcher aparatus is a little different but for a kit bash it is good enough as they use the same bridge from the M60 ALVB.
Re: Chrisswim Stuff.
Posted: Sun Sep 04, 2022 7:10 am
by chrisswim
I read using same M60 AVLB on Abrams even though not as long as the Wolverine bridge. Cost is significantly less than Wolverine.
Re: Chrisswim Stuff.
Posted: Fri Sep 09, 2022 6:57 am
by chrisswim
Re: Chrisswim Stuff.
Posted: Sun Sep 11, 2022 5:11 am
by redleg
Very impressive Chris!
Re: Chrisswim Stuff.
Posted: Sun Sep 11, 2022 8:26 am
by pmskaar
That is quite a collection you have there, Chris!
Re: Chrisswim Stuff.
Posted: Sun Sep 11, 2022 2:05 pm
by chrisswim
Gents, just painting, stripping and repainting stuff.
Watching college football, painted M 60 and M-1 Abrams AVLB. Still need to work on the tracks.
Re: Chrisswim Stuff.
Posted: Mon Sep 12, 2022 10:33 pm
by redleg
Nice looking M60s!
Re: Chrisswim Stuff.
Posted: Mon Oct 17, 2022 1:30 am
by chrisswim
Mike, thank you sir.
Did some of the mud previously on the Abrams and Bradleys
Found a turret for the MBT-70, painted it.
Re: Chrisswim Stuff.
Posted: Mon Oct 17, 2022 2:13 am
by chrisswim
I bought a large micro armor group. In the group some are not what they propose to be… a bunch were supposed to be GHQ and who knows who the manufacturer was. Another surprise are these two tanks with turrets glued down.
As I took the based off, popped the turrets off, I was surprised. The broken barrels were glued to the hull.
So the two hulls May end up as bridge layers, certainly the Leopard 2 hull. The Leopard 1 might become an engineering vehicle, FO, or try to make it a regular Leopard 1A1….
Have work to do on the Bradleys and Hummvs to finish the refurbishment after stripping them.
Need to camo these after stripping the paint off, have bunches more to do.
Re: Chrisswim Stuff.
Posted: Mon Oct 17, 2022 6:22 am
by redleg
Looking good Chris! That MBT-70 is a cool looking tank! Does the commander's MG have dual ammo boxes? I haven't really felt a need to acquire any MBT-70s, but now I'm rethinking that!