Need a Part - Have a Part
Moderators: dnichols, GHQ, Mk 1
-
- E5
- Posts: 6658
- Joined: Wed Dec 15, 2004 11:22 pm
- Location: Jacksonville, FL
Re: Need a Part - Have a Part
Here is a thread to Publish your need/want or surplus.
A hull, a turret, a vehicle or two…..
A hull, a turret, a vehicle or two…..
Chris
-
- E5
- Posts: 6658
- Joined: Wed Dec 15, 2004 11:22 pm
- Location: Jacksonville, FL
Re: Need a Part - Have a Part
First good trade with Shawno.
.
Extra, surplus, possible trade….
M728 CEV, Hummv, Stryker Dragoon, Marders 1, Leopard 1, M35 2.5 ton truck,
M901, M60
.
Looking for….
Abrams hull, Abrams even with broken barrel, Sgt York,
Or let me know what you have surplus.
.
Extra, surplus, possible trade….
M728 CEV, Hummv, Stryker Dragoon, Marders 1, Leopard 1, M35 2.5 ton truck,
M901, M60
.
Looking for….
Abrams hull, Abrams even with broken barrel, Sgt York,
Or let me know what you have surplus.
Chris
-
- E5
- Posts: 201
- Joined: Mon Aug 10, 2020 11:04 am
- Location: Townsville, Australia
Re: Need a Part - Have a Part
Any Australians floating around up to swap some bits? International postage in and out of the Colonies bites hard at the moment.
Little Metal Men: A story of a distracted wargamer
“A learning experience is one of those things that says, 'You know that thing you just did? Don't do that.”
- Douglas Adams
“A learning experience is one of those things that says, 'You know that thing you just did? Don't do that.”
- Douglas Adams
-
- E5
- Posts: 6658
- Joined: Wed Dec 15, 2004 11:22 pm
- Location: Jacksonville, FL
-
- E5
- Posts: 3356
- Joined: Thu Oct 08, 2015 3:44 am
Re: Need a Part - Have a Part
What kind of M60, Chris. Original model, GHQ, I'm interested in those. Round turret?
All blessings flow from a good mission statement.
Pogo was right. So was Ike.
"A Gentleman is a man who is only rude intentionally." (Churchill)
Give credit. Take responsibility.
Pogo was right. So was Ike.
"A Gentleman is a man who is only rude intentionally." (Churchill)
Give credit. Take responsibility.
-
- E5
- Posts: 6658
- Joined: Wed Dec 15, 2004 11:22 pm
- Location: Jacksonville, FL
-
- E5
- Posts: 3356
- Joined: Thu Oct 08, 2015 3:44 am
Re: Need a Part - Have a Part
If they didn't have that Urdan cupola on tem, I would take 'em... Call me.
All blessings flow from a good mission statement.
Pogo was right. So was Ike.
"A Gentleman is a man who is only rude intentionally." (Churchill)
Give credit. Take responsibility.
Pogo was right. So was Ike.
"A Gentleman is a man who is only rude intentionally." (Churchill)
Give credit. Take responsibility.
-
- E5
- Posts: 3385
- Joined: Tue Mar 21, 2017 1:09 am
Re: Need a Part - Have a Part
I would like some M60 tanks if they are the A2 version if not I could use them for 3rd world armies.
-
- E5
- Posts: 3356
- Joined: Thu Oct 08, 2015 3:44 am
Re: Need a Part - Have a Part
As a former platoon leader of an M60A2 platoon, I can tell you you could not make a worse choice. You are better off with any other model of the tank. A2s were only in service for 5 years for a good reason. They were maintenance nightmares. The rate of fire was wholly inadequate. The caseless ammunition was fragile and had to be handled with care, lest you end up with thousands of beads of powder rolling around the floor of the turret.
All blessings flow from a good mission statement.
Pogo was right. So was Ike.
"A Gentleman is a man who is only rude intentionally." (Churchill)
Give credit. Take responsibility.
Pogo was right. So was Ike.
"A Gentleman is a man who is only rude intentionally." (Churchill)
Give credit. Take responsibility.
-
- Posts: 69
- Joined: Sat Oct 23, 2004 11:51 pm
- Location: Indiana
Re: Need a Part - Have a Part
Mike,
I am need of a Jagdpanther 88mm gun barrel if any one has an extra. Mine fell behind the work bench and seems to be forever lost.
Of course, I am willing to trade for said item.
Mike
I am need of a Jagdpanther 88mm gun barrel if any one has an extra. Mine fell behind the work bench and seems to be forever lost.
Of course, I am willing to trade for said item.
Mike
-
- E5
- Posts: 182
- Joined: Sat Aug 08, 2020 4:32 am
Re: Need a Part - Have a Part
Wanted
Roland radar dishes
I'm UK-based if that matters.
Roland radar dishes
I'm UK-based if that matters.
-
- E5
- Posts: 6658
- Joined: Wed Dec 15, 2004 11:22 pm
- Location: Jacksonville, FL
Re: Need a Part - Have a Part
Tanker Mike,
I found my barrel for you.
Gents,
Any extra Abrams hulls, even old hulls. (Damaged turret or lost). M1, M1A1 extra hulls.
I found my barrel for you.
Gents,
Any extra Abrams hulls, even old hulls. (Damaged turret or lost). M1, M1A1 extra hulls.
Chris
-
- Posts: 18
- Joined: Wed Nov 24, 2021 6:08 am
- Location: Denver, CO
Re: Need a Part - Have a Part
Greetings,
I have 3 old M548 bodies, 2 w/canvas covers - painted up soviet by a previous owner.
Also have a single BRDM1 which was worked on.
All date back to the '70s, free to a good home.
Let me know.
Wild Geese
I have 3 old M548 bodies, 2 w/canvas covers - painted up soviet by a previous owner.
Also have a single BRDM1 which was worked on.
All date back to the '70s, free to a good home.
Let me know.
Wild Geese
-
- Posts: 69
- Joined: Sat Oct 23, 2004 11:51 pm
- Location: Indiana
-
- E5
- Posts: 207
- Joined: Sat Nov 19, 2016 9:21 pm
- Location: Ontario Canada
Re: Need a Part - Have a Part
I have too many modern French heavy weapons. I do not need a dozen 81mm mortars and I have to review unit organizations but I am sure I will have quite a few more items. I would like more infantry strips in trade.
Going to have some Mistral MANPADs and .50 BMGs. Still looking at and for TOEs.
Going to have some Mistral MANPADs and .50 BMGs. Still looking at and for TOEs.