Show us yer stuff!
Moderators: dnichols, GHQ, Mk 1
-
- E5
- Posts: 784
- Joined: Sat May 21, 2011 3:11 am
- Location: Boise, ID
- Contact:
-
- E5
- Posts: 101
- Joined: Mon Jun 24, 2013 6:58 am
- Location: Sterling, VA
-
- E5
- Posts: 2383
- Joined: Fri Dec 24, 2004 3:21 am
- Location: Silicon Valley, CA
Those desert rats look great!
Are they mounted on pennies? That's how I do my infantry these days. I use acrylic gel medium for mounting my bases. What have you used?
I like the texturing you have done on the stands ... it makes the cast-on base of the figures much less prominent. That's an issue I fight with on my figures. It's easier to manage when the stand is grassy -- the flocking can help to hide the cast-on base (provided you get some flocking to stick on the cast-on base!).
Another technique I use is to sprinkle a bit of course sand as part of the flocking process. This winds up looking like scattered rocks and stones at micro scale.

Here is a stand of my French Armee d'Afrique infantry manning a 37mm trench gun (done by a bit of kit-bashing on a GHQ Romanian heavy weapons SG-43 HMG) .

And here is a command stand from my Armee d'Afrique infantry.
Here is the uniform I was seeking to represent:

The 37mm trench gun was one of the first stands I did for this force. I think I did a better job on the helmets with the rest of the formation, including the command stand. The goal was to make the Romanian Adrian helmet look more like a French tropical sun helmet. I effected this on the latter stands by sanding down the front a bit (so the long-tail on the helmet was not quite so asymmetrical), and putting a drop of different color on the crown.
Bring your Brits north into the Levant, and you'll get a taste of French fury!

Are they mounted on pennies? That's how I do my infantry these days. I use acrylic gel medium for mounting my bases. What have you used?
I like the texturing you have done on the stands ... it makes the cast-on base of the figures much less prominent. That's an issue I fight with on my figures. It's easier to manage when the stand is grassy -- the flocking can help to hide the cast-on base (provided you get some flocking to stick on the cast-on base!).
Another technique I use is to sprinkle a bit of course sand as part of the flocking process. This winds up looking like scattered rocks and stones at micro scale.

Here is a stand of my French Armee d'Afrique infantry manning a 37mm trench gun (done by a bit of kit-bashing on a GHQ Romanian heavy weapons SG-43 HMG) .

And here is a command stand from my Armee d'Afrique infantry.
Here is the uniform I was seeking to represent:

The 37mm trench gun was one of the first stands I did for this force. I think I did a better job on the helmets with the rest of the formation, including the command stand. The goal was to make the Romanian Adrian helmet look more like a French tropical sun helmet. I effected this on the latter stands by sanding down the front a bit (so the long-tail on the helmet was not quite so asymmetrical), and putting a drop of different color on the crown.
Bring your Brits north into the Levant, and you'll get a taste of French fury!

-Mark 1
Difficile est, saturam non scribere.
"It is hard NOT to write satire." - Decimus Iunius Juvenalis, 1st Century AD
Difficile est, saturam non scribere.
"It is hard NOT to write satire." - Decimus Iunius Juvenalis, 1st Century AD
-
- E5
- Posts: 101
- Joined: Mon Jun 24, 2013 6:58 am
- Location: Sterling, VA
Mark 1,
Thanks for the feedback, your stands look great. I use 20mm diameter acrylic bases that are 1.5mm thick -- they are only slightly larger than a US or Canadian penny. I glue the painted and weathered figures directly to the acrylic base and then texture it by applying fine pumice gel with a thin painter's palette knife. The ground base coat is an acrylic mudstone, followed by a dark brown wash and dry-brushing with a pale sand. I flock the stands in patches and then seal the stand with a spray matte lacquer.
Cheers,
Bez
Thanks for the feedback, your stands look great. I use 20mm diameter acrylic bases that are 1.5mm thick -- they are only slightly larger than a US or Canadian penny. I glue the painted and weathered figures directly to the acrylic base and then texture it by applying fine pumice gel with a thin painter's palette knife. The ground base coat is an acrylic mudstone, followed by a dark brown wash and dry-brushing with a pale sand. I flock the stands in patches and then seal the stand with a spray matte lacquer.
Cheers,
Bez
-
- E5
- Posts: 390
- Joined: Tue Jan 04, 2005 8:14 pm
- Location: Northern Virginia
- Contact:
OK, I haven't posted anything new in a while, but I've put a lot of models up on my site (www.microarmormayhem.com).
Among them, the ex-Soviet 2S19:

The Alouette II (of which I need some better photos)


and the Stug IIIG with sideskirts



Among them, the ex-Soviet 2S19:

The Alouette II (of which I need some better photos)


and the Stug IIIG with sideskirts



-
- E5
- Posts: 101
- Joined: Mon Jun 24, 2013 6:58 am
- Location: Sterling, VA
-
- E5
- Posts: 169
- Joined: Sat Sep 03, 2011 6:59 am
- Contact:
These were painted by my wife... yes, you read that correctly 
Let me know what you think. More photos on my Site
Tanner


Let me know what you think. More photos on my Site
Tanner

-
- E5
- Posts: 1629
- Joined: Sun Jun 25, 2006 2:24 am
- Location: Waukegan, Illinois USA
-
- E5
- Posts: 1629
- Joined: Sun Jun 25, 2006 2:24 am
- Location: Waukegan, Illinois USA
-
- Posts: 58
- Joined: Sat May 21, 2011 8:51 pm
- Location: Dover,Pa.
-
- Posts: 58
- Joined: Sat May 21, 2011 8:51 pm
- Location: Dover,Pa.