GHQ Update

This is a general forum for all types of posts related to Military models.

Moderators: dnichols, GHQ, Mk 1

Post Reply
GHQ
Site Admin
Posts: 708
Joined: Tue Oct 19, 2004 1:50 am
Location: Minneapolis, MN, USA

GHQ Update

Post by GHQ »

We would like to give you an update on our situation here at GHQ. About 10 days ago we sent on an e-mail letting you know that operations at our factory in Uptown Minneapolis would be interrupted, and irregular for an unknown amount of time. That day we boarded up the building and spent the day pulling much of our vital intellectual property out to a location far away from the chaos that was going on in our area. At that point all that we could do was hope, and pray, that we would not have the damage that some of our neighbors had suffered. Every night we helplessly watched what was happening on TV, and every morning we came and surveyed our area.

It’s always awful to see that type of destruction happen in any area. It’s very surreal to see it happening on TV, be able to recognize all of the buildings, and know that the rioters could be at your doorstep at any second. Many businesses in our area were hit very hard, and some will likely not be able to recover. Some were burned to the ground. Thankfully we managed to come through relatively unscathed. We have a lot of graffiti, but no structural damage, or burning.

Things have continued to be tense in Minneapolis, and we wanted to proceed cautiously. In the middle of last week we started to bring back our computers, and started to get things operational again. There was supposed to be a large protest in our neighborhood last Friday night, so we pulled our computers and server out again. Fortunately that did not happen in our area, and nothing happened over the weekend. We are back at it again this week, and will continue to get things back to normal, but will remain cautious about the safety of our employees and our 53 years worth of design work, hand castings, hand molds, computer data, etc.

We are fortunate to have a large number of wonderful customers, and we just wanted to keep you in the loop about the status of things at GHQ. We started sending some orders out last week, and will continue to ship more this week. We are continuing to work on our website overhaul, and think that we are very near having online ordering capabilities again.

The last 3 months have presented the largest challenges that we have ever experienced in our 53 years. The coronavirus has disrupted the world, our website issues have caused us to lose an enormous percentage of our income, and the rioting has threatened our very existence. With your help, and understanding, we are hoping that we can move on to another 53 years that will be even better than the first!

We hope that you and your families are safe and doing well!

Thank you for your support,
GHQ

PS Please note that our mailing address is different from where everything is produced at our factory.

redleg
E5
Posts: 3809
Joined: Fri Dec 17, 2004 11:02 am
Location: Riverside, CA

Post by redleg »

Thank you for the update! Please stay safe! I'll have an order for you when you are up and running again!

PolishGI
E5
Posts: 833
Joined: Wed Jun 19, 2013 2:57 am
Location: SW USA

Post by PolishGI »

Thanks for letting us know. The level of uncertainty has to be the worst.

Stay safe, protect the IP and let us know when you are ready to go. I have a decent sized GHQ order arriving today or tomorrow. I will find more stuff to call in or order online with you guys again.

Hopefully, we can all pitch in to help with the lost revenue.
Image Charlie don't surf!
"Don't do things by half."
GHQ BUILD THREAD

madman
E5
Posts: 210
Joined: Sat Nov 19, 2016 9:21 pm
Location: Ontario Canada

Post by madman »

Yes, thank you for keeping us in the loop. And also as said please keep yourselves safe first and foremost.

DAK
E5
Posts: 246
Joined: Thu Mar 22, 2007 4:59 am
Location: ILLINOIS

Post by DAK »

Sounds like your prayers were answered. I was given a tour of the factory when Jim Moffitt worked there, it was pretty cool. I have money ready to spend as soon as the on line ordering is up and running. Stay safe and thanks for the update.

stenna00
Posts: 62
Joined: Thu Oct 27, 2005 9:43 pm
Location: Leicester, UK

Troubles

Post by stenna00 »

In the UK we have little idea what is going on in Minneapolis - sorry to hear it affected you so much. I don't order directly from GHQ but I do order regularly from a UK company so I have not noticed any delivery issues. I hope you get back to normal as quick as possible. There is no chance that I will stop buying GHQ models anytime soon so you'll have my custom for the foreseeable future.

rdenman62
E5
Posts: 153
Joined: Sun Jul 09, 2006 5:35 pm
Location: Michigan

Post by rdenman62 »

Hey GHQ, any new news? Website progress?
How are things in Minneapolis?
Peace thru superior firepower

rdenman62
E5
Posts: 153
Joined: Sun Jul 09, 2006 5:35 pm
Location: Michigan

Post by rdenman62 »

Hey GHQ, any new news? Website progress?
How are things in Minneapolis?
Peace thru superior firepower

Post Reply